Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Pro Tools TDM Systems (Mac) (http://duc.avid.com/forumdisplay.php?f=11)
-   -   Magma Power Supply Failure Signs (http://duc.avid.com/showthread.php?t=264370)

guitar012001 01-16-2010 06:39 AM

Magma Power Supply Failure Signs
 
Back in November of 2009, I started having my HD 192 start to go offline and lose digital clock connection from my core card and 2 accel cards that are in my Magma chassis. Mine is the older 32bit 33mhz PCI/PCIX chassis which is about 7 years old. However, when this kept happening, mostly when it was sitting idle or overnight, I would just shutdown and restart and I would be ok. Then it got to the point that it was doing this every 2-3 hours. I ran Digitest and all my cards checked out fine. I then checked my APC UPS device and noticed that the led's that showed the load had no led's lit. This meant that something was internally wrong with the UPS or I had power supply issues with my 192 and or my Magma Chassis which both were plugged into. After talking to Magma and Digi, I replaced the 320 watt, "cheapo" power supply with a slightly better 500 watt one from Best Buy and my offline/clocking issues have ceased and my entire system is more robust. Just thought I would share that with those who may be having 192 clocking and offline issues.
http://i959.photobucket.com/albums/a.../StudioRig.jpg


All times are GMT -7. The time now is 04:15 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com