Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Third Party Interfaces (http://duc.avid.com/forumdisplay.php?f=53)
-   -   Recommendations for a interface that works well with PT (http://duc.avid.com/showthread.php?t=406800)

Sebastian_SAE 10-18-2019 06:55 AM

Recommendations for a interface that works well with PT
 
I'm looking for a Interface that has a good quality Headphone Amp and works well with PT. My price range is around 300$.

I tried using a Fiio E10K since i only use my PC for editing and mixing, however there is a lot of lag (play/pause/switching solo)
probably because of the Fiio (cpu/ram never above 60%).

Is the DAC/Headphone Amp in a Scarlett 2i2 / Presonus 26c comparable to the Fiio? (Headphones: 990/770pro 250 ohm)

Appreciate your input :)

junkgear 10-18-2019 08:53 AM

Re: Recommendations for a interface that works well with PT
 
Focusrite interfaces have good drivers and generally sound good.
If you can go a little higher, I would go for their Clarett series of interfaces, which sound very good. Something like the Clarett 2Pre would work well and you can sometimes find demo units right around $300. If you go that way, just make sure you get the USB version as they make Thunderbolt versions too.

albee1952 10-20-2019 06:15 PM

Re: Recommendations for a interface that works well with PT
 
With 250 ohm headphones, you may find many interfaces yield low volume:o


All times are GMT -7. The time now is 12:53 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com