"Tearing" Sound when recording with 11r
 

Hey guys. Eleven Rack is brand new for me, but from what I have used of it so far, it is incredible. The tones are mind-glowingly good imo.

I'm having problems when recording a guitar though. Every ten seconds or so, there is a very loud "tearing" sound when I am playing through the 11r. Here is a clip of what I am talking about.

The sound occurs at 0:07, 0:17, and :026.
https://app.box.com/s/rmr4wmm5mftwcxjawjp802q7rlua1752

I am using the 11r through S/PDF with my Scarlett 8i6 interface.

I have also tried using the 11r as the interface through USB, and it still occurs.

I have the Digital Output setting set to "Slipt In/Out," if that helps.

Any ideas what this is?

Re: "Tearing" Sound when recording with 11r
 

It seems a pop caused by a too low latency value: try to increase the buffer size for Eleven Rack (you find the Avid Eleven Rack entry into the Control PAnel if you use Windows) and see if it disappears.

Re: "Tearing" Sound when recording with 11r
 

Did you set one up as master when using SPDIF?

Re: "Tearing" Sound when recording with 11r
 

I'm not sure. The Digital Clock/Input setting on the 11r says:

EXTERNAL CLOCK: Valid

CLOCK SOURCE:
Int 44.1kHz

DIGITAL INPUT:
S/PDIF


When I unplug the USB from the 11r, I am able to change the clock source to External, but once I plug it back in, it resets to internal.

BUT

The noise does go away when I change the clock source to External. Yay!

I am using Logic Pro X on a Mac, so I like to use the Eleven Rack Editor.

Does this mean I will not be able to use the Eleven Rack Editor when I am using the 11r through S/PDIF?

Re: "Tearing" Sound when recording with 11r
 

Got it fixed. All I did was change the Scarlett to the slave and made the 11r the master. Immediately fixed it. Thanks guys!

Re: "Tearing" Sound when recording with 11r
 

Great! Remember that all the clocks need to be synchronized. One can be the master and the other the slave.