Metering Issue: -23dB tone reading as-3LU in Insight
2 Attachment(s)
I noticed my levels weren't matching up so I've been investigating.
I set up a -23dB sine wave with Avid's Signal Gen on a mono audio track. I have Izotope Insight set up on my master fader and it's reading -3LU/-26LUFS (Momentary Max). PT metering set to 'Linear'. It's my understanding that -23dB is equal to 0LU/-23LUFS and I can't work out where I'm getting the -3dB drop. I've tried having Insight on the track insert instead of the master and have the same issue. I have recorded a clip of the -23dB generated tone and imported the file in to Izotope RX and it's giving a similar reading. What am I missing...? See screenshots attached |
Re: Metering Issue: -23dB tone reading as-3LU in Insight
Quote:
Route the mono track to a mono master and see if its the same! if mono routed to stereo master then you have the -3db pan law Chris |
Re: Metering Issue: -23dB tone reading as-3LU in Insight
Thanks, just tried that. Doesn't seem to make a difference though..
|
All times are GMT -7. The time now is 05:14 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com