Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Pro Tools SE and Essential (Mac) (http://duc.avid.com/forumdisplay.php?f=73)
-   -   M-Audio Keystation 49 (New 2014) transport buttons in Pro Tools (http://duc.avid.com/showthread.php?t=362336)

Edwud 12-26-2014 01:06 AM

M-Audio Keystation 49 (New 2014) transport buttons in Pro Tools
 
1 Attachment(s)
Hi! How to configure transport buttons and directional buttons M-Audio Keystation 49 (2014) in Pro Tools 8?
Doesn't work, they just play notes.
Use Mac OS 10.9.5, Pro Tools 8.0.5
Works well in Logic Pro X and Ableton.

Bill Denton 12-26-2014 08:36 AM

Re: M-Audio Keystation 49 (New 2014) transport buttons in Pro Tools
 
You will probably have better luck looking on the M-Audio site.

You will need to determine if Pro Tools is actually supported...it uses a different "control protocol" than that used by the other DAWs...

Edwud 12-26-2014 10:15 AM

Re: M-Audio Keystation 49 (New 2014) transport buttons in Pro Tools
 
I write on the site m audio, they simply ignore me. I decided to write here.

Bill Denton 12-26-2014 04:25 PM

Re: M-Audio Keystation 49 (New 2014) transport buttons in Pro Tools
 
I did some additional checking...supposedly it will work, but I could not download the manual for the new unit (M-Audio server problem).

The only information I could find was this...http://m-audio.com/kb/article/1651

It shows how to set the Keystation for HUI mode...do that, then go to Peripherals Setup and follow those instructions. I don't have any of the older Pro Tools documentation so I can't help you farther.

Sorry I can't be more help...good luck!

Edwud 12-28-2014 02:12 AM

Re: M-Audio Keystation 49 (New 2014) transport buttons in Pro Tools
 
Tnx for help! I will try to find a solution.


All times are GMT -7. The time now is 06:54 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com