Please help, using NI Traktor with Mbox 2 Pro
Hello,
Anybody else here that is using Traktor with Mbox? How do I route etc to be able to queue in my headphones using Mbox Pro and Traktor? Right now, I just hear the track thats coming out of the speakers, I'm not able to hear the track on the other deck that I want to mix in. My headphones are plugged into the Mbox Pro. And one more question, do You know how I can use my microphone thats plugged in to my Mbox Pro with a software compressor on if that is possible during recording a DJ-set? Would be really really thankful if somebody could shed some light on this for me. Best Regards -Alex |
Re: Please help, using NI Traktor with Mbox 2 Pro
Hi Alex,
I use this setup. Took me a while to figure it out but his is how I do it. You’ll want to plug your headphones into the 2nd head phone jack and press the “3-4” button. This will allow you to monitor your cue mix via the headphones on outputs 3-4. In Traktor’s Output Routing preferences, you’ll want to set the Monitor to Outputs 3 and 4. The headphone cue mix is controlled by the ‘Ph Mix’ knob in traktors UI. Move it to 0% and you’ll hear whatever is cued. Move it to 100% and you’ll hear the Master out. Move it anywhere in between and you’ll hear a mix of both. Hope this helps! -Mark |
Re: Please help, using NI Traktor with Mbox 2 Pro
Hi Mark!
Thanks alot, I'm gonna try this, It will probably work! I will let You know, thanks again! |
Re: Please help, using NI Traktor with Mbox 2 Pro
Thanks Mark! It worked, first It didn't, but I had forgot to press down the Cue button haha, I sat for 20-30 minutes trying to figure out what it was, Embarressing considering that I've been a DJ for 15 years.. :p
|
Re: Please help, using NI Traktor with Mbox 2 Pro
By the way, How do You record a set?
Whats the routing and procedure? Would be great if You could help me with that also.:-) |
Re: Please help, using NI Traktor with Mbox 2 Pro
Hey,
Glad it worked! :) When I record a set I route the MBox SPDIF out to an Alesis Masterlink recorder. I'll then bring the audio back into Pro Tools if I need to make any edits. -m |
All times are GMT -7. The time now is 06:38 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com