DIGI 02r power supply blown again
 

Just powered up my computer andoo2r and it's not recognizing the hardware..Could this be tha same dreaded power supply problem again?
Had this fixed less than a year ago

sheeze I have some sessions coming up this week aggggghhhh!!!
any other ideas?

thanks

Re: DIGI 02r power supply blown again
 

It's possible that the replacement power harness went bad, but not too likely. First thing to do is power everything down and reseat the firewire cable at both ends. If that doesn't fix it, power down the 002R, open her up, and reseat the power harness connector. If that doesn't do it, you may have a problem with your firewire card. You could try reseating it in it's PCI slot, if applicable.

Re: DIGI 02r power supply blown again
 

I had a similar problem a while back.............replacing the firewire cable fixed it for me.


...dog

Re: DIGI 02r power supply blown again
 

Ditto on bad firewire cables. I had one quit for no apparent reason(never been moved or touched).