Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Pro Tools M-Powered (Mac) (http://duc.avid.com/forumdisplay.php?f=27)
-   -   MIDI Controllers won't let me select ProjectMix (http://duc.avid.com/showthread.php?t=402383)

skiffle 12-11-2018 03:29 AM

MIDI Controllers won't let me select ProjectMix
 
Hi, I am working with Protools MP9, ProjectMix I/O and Macbook Pro 10.6.8

I have lost connection between PM and PT.

According to the PM Manual i must do the following:

With the ProjectMix I/O in Pro Tools mode, launch Pro Tools and select Hardware Setup > Peripherals > MIDI Controllers. Under Type, select HUI. Under Receive From, select ProjectMix I/O Control. Under Send To, select ProjectMix I/O Control.

My problem is that 'Midi Controllers' will Not let me select anything other than 'None' Can anybody please help me with this?

Somebody on here had the same ProjectMix Protools connection problem i'm struggling with, and filling in the Midi Controllers as above fixed the problem!

Why can't i select anything in MIDI Controllers? Please Help!!

Thanks again,
skiffle

skiffle 12-17-2018 10:54 AM

Re: MIDI Controllers won't let me select ProjectMix
 
Surely somebody out there can tell me why MIDI Controllers won't let me select ProjectMix or anything else ??????

Cheers,
skiffle

albee1952 04-26-2019 01:43 PM

Re: MIDI Controllers won't let me select ProjectMix
 
What's the goal here? If its to use the PM as controller and audio interface("audio engine"), then AFAIK, nothing needs to be set under midi, but the PM must be selected under the HARDWARE menu as the "audio engine".

It might be worth some searching on youtube as well.:o


All times are GMT -7. The time now is 12:20 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com