Best/safest way to clean dust film off TDM Accel cards
Hello,
Besides compressed air, how do you safely go about wiping a film of dust off TDM cards? I don't want to use anything that could get caught on sharp protruding objects or leave a residue. Thanks in advance! |
Re: Best/safest way to clean dust film off TDM Accel cards
I'd go with the canned air unless you have access to a board washer used to clean off the flux after soldering
|
Re: Best/safest way to clean dust film off TDM Accel cards
I use a soft brush and a can of air
or you can wash the card with isopropyl 95% dust will not cause any tech issues with a card unless it has a something conductive in it, and they always run real hot so dust won't affect it that way either it's just a personal choice, although I always clean the real dusty cards off prior to making repairs or upgrades |
Re: Best/safest way to clean dust film off TDM Accel cards
Thanks! Is the brush you use of a special variety?
|
All times are GMT -7. The time now is 06:23 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com