Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) (http://duc.avid.com/forumdisplay.php?f=17)
-   -   send/return (http://duc.avid.com/showthread.php?t=171268)

RogerJeep 06-29-2006 12:43 PM


I am using 002 with 7.1. I am trying to use an external reverb unit. Here is how I am routing the device. send analog output5, insert analog input 4. When I do this I get a very loud noise. What am I doing wrong. I have tried other outputs and inputs as well as other devices they all are making the same noise. Please help.


spkguitar 06-29-2006 12:54 PM

Re: send/return
It would be easier to help if we knew what reverb unit specifically.

Rail Jon Rogut 06-29-2006 03:08 PM

Re: send/return
Create an Aux Track, set the input to an unused Bus (say Bus 3) -- plug the hardware like so:

002 4 Out -> Outboard Effect In
002 4 In <- Outboard Effect Out

On the Aux Track where you normally insert a plug-in.. select I/O 4

To send to the effect, create a post fader send (Bus 3) on the track you wish to effect (say the vocal) -- the effect return level will come back on the Aux Track. Set your effect device to 100% wet. Ctrl+click on the SOLO button of the Aux Track to solo isolate it.


GW 07-01-2006 09:07 AM

Re: send/return

It would be easier to help if we knew what reverb unit specifically.

...and the reason for that is f.x. if it´s a unit with a S/PDIF IO, I would recommend that solution insted. Many modern reverbs has a S/PDIF that you can connect to the Digi 002 with two 75 Ohm cables and you get digital all the way without D/A and A/D conversion back and forth...

All times are GMT -7. The time now is 03:13 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com