Main Output Level Ajustement
Hi everybody,
I was just wondering if there are recommandations regarding the Main Output Volume Level. Mine is ajusted at 6.2 while getting out into a Mixing Desk (PA) and I think I could put it higher for feedbacking and natural sustain. Are there any rules for having the best signal output ? Phab |
Re: Main Output Level Ajustement
Seemed to be an important point for me from a "best signal/noise ratio" standpoint ...
Nobody ? Phab |
Re: Main Output Level Ajustement
For months I've been using my 11r live at a volume of 5.0 and inept soundguys said it was my rig that was bad because of a bit of noise he saw on my channel. After doing a bit of reading on the line/mic level signals I found that if I turned my volume all the way up to 10.0, the soundboard would receive a much hotter signal and the soundguy found he didn't need to use gain at all which eliminated the noise altogether.
Long story short, the hotter the signal the better = volume at 10.0 |
All times are GMT -7. The time now is 07:13 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com