Pro Tools does not support unmapped network volumes?...HELP!
 

Dear experts...

Hello there...I´m repairing (reinstalling) Pro-Tools LE 7.0 on an HP Pavillion zv5000 laptop. While trying to open my previous sessions from an external E: Drive (not yet specifically formated for audio) it shows "Pro tools does not support unmapped network volumes". I´m unable to open any previous session.

I´ll greatly appreciate your advice on this matter...

dm3

Re: Pro Tools does not support unmapped network volumes?...HELP!
 

You could try mapping it.

right click "my computer" - select "map network drive" - select the hard drive and assign it a drive letter.

Maybe that works.

Another solution could be using the workspace browser within Pro tools (windows - workspace browser) and see if pro tools sees you drive. If not you should try mounting it within pro tools.

Re: Pro Tools does not support unmapped network volumes?...H
 

This happens sometimes if you connect an external drive after opening Pro Tools.

Always connect all drives that will be used in PT before opening the program.

Re: Pro Tools does not support unmapped network volumes?...HELP!
 

Hi I had the same problem And I called to digidesing support and they told me what I should to do :thet says pro tools does not support unmapped network volumes". this message appers when you open pro tools after you plug in a flash memory or external hard disk you have to restart your computer and first plug in your flash or hard disk and then open pro tools. I did this and my pro tools works perfectly I hop this hel you too.and other thing pro tools does not support any version of windows vista in 64 bits I had this system before and I had too much problems with messages like THe buffer engine or and my 003 rack like audio clock and my 003 did not work untill I change to "windows vista ultimate 32 BITS"pro tools only works with "windows vista bussines or ultimate but 32 bits"o I reccomend you guys chek what systems you have and if you have 64 bits pro tools never will works perfectly.(sorry for my inglesh but I just want to help because I was looking about for 6 month looking for the solution to all my problems with pro tools and this was only I had to change to 32 bits.!!)ok my frends Thankx.!!