Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) (https://duc.avid.com/forumdisplay.php?f=15)
-   -   -9073 errors (https://duc.avid.com/showthread.php?t=202088)

Colorblind 07-25-2007 03:59 PM

-9073 errors
 
Hey all,

I'm running a decent sized session (40 or so tracks, not a ton of plugs), and when I try to bounce to disk, it gets about 3 minutes and 20 seconds in and I get the "DAE can't get audio from the drives fast enough. Your drive may be too slow or fragmented, or a firewire drive could be having trouble due to the extra firewire bandwidth or CPU load -9073" error.

I'm running PTLE 7.3 with a 002r on a MDD Dual 1.25ghz G4 with the RAM maxed out. OS 10.4.8. My firewire drive is a Maxtor 120GB with Oxford 911 chip, partitioned into three 40GB sections. Can anyone help me get this solved? Thanks in advance,

C

Colorblind 07-26-2007 12:54 PM

Re: -9073 errors
 
After doing some searching, I changed my DAE buffer from 2 to 8, and tried to bounce again. This time it got through the whole song, but then I got an Assertion error saying the bounce failed. I then set my DAE buffer to 4, bounced again and it seemed to work fine.

C

FOX digital 07-27-2007 12:46 AM

Re: -9073 errors
 
Colorblind

maybe this helps. Had the same issues with -6085.

http://duc.digidesign.com/showthread...=&sb=5&o=&vc=1

Since i turned Dashboard off, there's no problems (knock on wood) anymore.

Tell me if it works for you.....

All the best

Claude


All times are GMT -7. The time now is 06:20 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com