Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Pro Tools 12 (http://duc.avid.com/forumdisplay.php?f=142)
-   -   no sidechains in offline bounce (http://duc.avid.com/showthread.php?t=396734)

kava 01-29-2018 07:23 AM

no sidechains in offline bounce
 
maybe it's a double post, but I cannot find any serious info on this.

when I do sidechain/ducking compression (Waves RenComp used as multiple mono), most of the time ducking my stems a little with signal from the voicover (5.1 post), I cannot use offline bounce. I always use multimono comps for ducking because I want different att/rel times for the Center and the other channels in dense mixes.

When I print my master bus the ducking works, offline bounce of the same bus won't work, so it's definitely no routing issue.

anybody else experiencing this?

john1192 01-29-2018 10:39 AM

Re: no sidechains in offline bounce
 
Quote:

Originally Posted by kava (Post 2471964)
maybe it's a double post, but I cannot find any serious info on this.

when I do sidechain/ducking compression (Waves RenComp used as multiple mono), most of the time ducking my stems a little with signal from the voicover (5.1 post), I cannot use offline bounce. I always use multimono comps for ducking because I want different att/rel times for the Center and the other channels in dense mixes.

When I print my master bus the ducking works, offline bounce of the same bus won't work, so it's definitely no routing issue.

anybody else experiencing this?

just did a sidechain offline bounce test here with NON-HD and it works as it should !!!

milosziv 06-29-2018 06:12 PM

Re: no sidechains in offline bounce
 
I've been having this problem as well! BUMP!

Goath 05-22-2019 06:41 AM

Re: no sidechains in offline bounce
 
I know it's an old thread but as there was no solution I decided to post it. I had this problem these days. After spending hours trying to figure out I was able to resolve by routing my aux for physical outputs instead of buses. mix 5.1 for outputs 1 - 6 and mixdown 2.0 for outputs 7 - 8. On the bounce dialogue box I set the source Physical Output.


All times are GMT -7. The time now is 02:31 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com