hello and please
 

Hi everyone. I've been reading this since I decided to buy but this is my first post. My request is that people keep this topic clean ie. USER CONFIGURATIONS. This will benefit all of us. after all, the reason that we requested this PC forum was to avoid unnecessary garbage.
Anyway here is my system - as yet untested.

P!!! 600 - Microstar BX440 motherboard - 256 MB RAM - 15.3 MB Maxtor HHD (7200) - Quantum 4.3MB HDD - Sony CRX140E CDR drive- 17" mon.

As soon as I get the software I will post a performance check.
bye http://www.digidesign.com/ubb/images/icons/cool.gif



------------------
Lawrence

Re: hello and please
 

You have enough there to do all you need. When you get the software make sure you don't have anything running in the background and no auto insert on the cd/cdr drives. My system is very similar exept I have a 650E

Re: hello and please
 

Hi guys & hello from Belgium.

Digi e-mailed me to confirm I would receive the software in 3 to 4 weeks. Hang in there !

Here's my config. (pretty close to yours) :

Motherboard : ASUS P3B-F (BX440)
CPU : Pentium III 667
VGA : Trident 9750 AGP 4Mb
RAM : 256 Mb
HD System : IDE Fujitsu 4.3 Gb 5400 rpm
HD Audio : IDE Ibm 20 Gb 7200 rpm
CDRW : HP 9110i 8/4/32
CD Rom : Actima 36x
Sound Card : Creative Labs Awe 64 Gold

Hope we can get to work soon !

Cheers,

------------------
Paul Curtiz / Scratch Studio

[This message has been edited by Paul Curtiz (edited June 02, 2000).]

Re: hello and please
 

Sorry for not respecting the intended use of this particular forum. I will let you guys know about my configs as soon as I get my computer.

Juergen http://www.digidesign.com/ubb/images/icons/cool.gif

Re: hello and please
 

Speaking of configurations,I hope i`m in the rite area to ask this. What is the right way to configure (hook together)a multitimberal keyboard and a separate sequencer(roland mc-500II) with my new 001-pc??? I need to know this before I can install the s/w ! I would really appreciate some help as I NEED to start this puppy up. THANX

Re: hello and please
 

Hi Jeff
It would seem to me that the MC500 is now surplus to requirement. The 001 Sequencer will be much nicer to use.
Connect the Keyboard to the 001 Midi ins and outs, switch the Keyboard to "Local Off" and run the audio out to the 001 inputs 3&4 and bingo!

------------------
Lawrence

Re: hello and please
 

Lawrence, thanx for your help.Now, how do I convert Roland seq. midi files to pro tools midi files,or can I?? Also,is it necesary to disable "local control"? I understand "local con."but I want to also play the kbd.SO??
Again,thanx to all for your input

Re: hello and please
 

<<Now, how do I convert Roland seq. midi files to pro tools midi files,or can I??>>

I have a roland MC-50 mkII hardware based sequencer similar to yours, and it has been a few years since I used it, but I was able to convert the Roland files into .mid format, which is the standard midi file format that Pro Tools can import as type 1 or type 0. Check page 130 of the reference guide. Your MC-500 was the big brother version of mine so it should easily be able to do this.



------------------
RLM

Re: hello and please
 

Hi Jeff
Local off diconnects the on board sounds from direct control of the keyboard, leaving the MIDI IN to access the sounds. The normal setup is to set THRU on the sequensor which combines the keyboard's live performance with the interface's MIDI OUT. In other words, everything works. Since I dont have PTLE yet I cant be specific as to where to set this, but it should be simple. Let me know if you have a problem once you receive the software.

------------------
Lawrence

Re: hello and please
 

No-land
Grow up,get a life,go away with your jive childish "instructions" for people who can think for themselves.I don`t want a mac and I didn`t ask you for your stupid opinions. When will those of you who invested in outdated technology stop trying to drag foward thinking people (like me-ha ha)into your bottomless money pit?? I and other p.c.users aren`t wasting others time with this silly "debate"