Why do I have to reboot S1 for EUCON to recognize controller?
I have to Reboot my S1 everyday for EUCON to recognize it. While the ipad connects without issue? What am I doing wrong? If anyone has some insight let me know that would be wonderful. Thanks!
|
Re: Why do I have to reboot S1 for EUCON to recognize controller?
Maybe it's got a bad IP and has to refresh. Where is the S1 getting DHCP from?
|
Re: Why do I have to reboot S1 for EUCON to recognize controller?
Not sure how to set DHCP. Its a simple ethernet cable direct to the tower. I did not know why it always connected when I did no have the ipad. Now its always a power up dance after a session is going.
|
Re: Why do I have to reboot S1 for EUCON to recognize controller?
This happens to me also every time I switch on.
Running a Dock and S1 with Amazon Fire 10 and Huawei T5. Tablets are both fine (as long as they don't get seen as the same IP address which occasionally happens). But both surfaces require a restart and Eucon to restart applications for them to be seen. Frustratingly, as each surface is turned off, they appear in available surfaces. Latest PT Ultimate on a Mojave Mac Pro 5.1. All Avid hardware running off a dedicated router off Ethernet port 2. |
Re: Why do I have to reboot S1 for EUCON to recognize controller?
Same behavior for me. Two Artist Mix units and a Dock. The tablet usually works right away but the hardware usually needs more than one power up to be recognized by Eucon.
|
All times are GMT -7. The time now is 06:02 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com