888 Power Supply fails, clicking
Hi there
As a relict from my Mix system I still have a 888 I/O interface. I did not use it for years. Lately I had the idea to use it as standalone A/D. Sadly it does not power up anymore. But there is some periodic clicking coming from where I think the PSU is seated. Because this hardware is quite old, replacing the PSU is not really an option for me. But maybe this is a known issue with a easy fix? Kind regards, Till |
Re: 888 Power Supply fails, clicking
Nothing to add but interested in any solution that comes along as I have a few of those too.
|
Re: 888 Power Supply fails, clicking
bump
|
Re: 888 Power Supply fails, clicking
Any help would be much appreciated. Even if it is confirmation of power supply failure.
Today I had the same situation happen on not one but 2 888 i/o interfaces. I don't use this old digi rig much anymore. when I powered on the 1st 888 it lit up briefly, went dark and then began to pulse like a metronome thru the outputs. I then powered the second and it seemed to be fine, so to use the system I disconnected the master slave cable and the 1st 888 cable and repowered the 2nd 888. It failed within seconds. These units worked fine just several months ago. I have good power and these units are mostly disconnected from a/c when not in use to avoid potential damage from spikes or strikes. |
All times are GMT -7. The time now is 05:33 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com