Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   VENUE Live Sound Systems (http://duc.avid.com/forumdisplay.php?f=25)
-   -   Dead E3 engine (http://duc.avid.com/showthread.php?t=413304)

Jvadillo 12-21-2020 01:22 PM

Dead E3 engine
 
Hi all,

One of my E3 engines is apparently dead, it boots all right and discovers both the s16 and the s3 surface but the engine picture on the devices tab appears greyed out with an exclamation sign and no audio passes through the console. Hovering the mouse over the engine icon gives a “not available” status on MAC address, I/O firmware version and network switch firmware version. A warning is on the bottom that states: “VENUE is currently waiting for connection to the E3 Engine I/O and the E3 Engine network switch”. Tried restoring a couple times with no effect, opened the engine and checked all cables, they all seem to be ok, checked the SD card on the auxiliary next to the mobo against the one on my other engine and they seem to be identical. Swapped the mobo between engines and same problem.

Obviously there’s some issue with the internal switch. Any help would be appreciated.

Regards

Kristo Kotkas 12-24-2020 02:59 PM

Re: Dead E3 engine
 
Hello, I believe the best way to go is as always, contact Avid Live Sound support.

Pacera 01-06-2021 09:52 AM

Re: Dead E3 engine
 
Sounds like an internal AVB network card issue, wich usually mess up the entire system if it's the case.
Did you have a look under Windows at all the network cards ?
Did you verify that the internal AVB card got the proper ip adress to work with Venue System ?


All times are GMT -7. The time now is 12:56 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com