Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Tips & Tricks (http://duc.avid.com/forumdisplay.php?f=4)
-   -   How to make a rise (http://duc.avid.com/showthread.php?t=390709)

Raoul23 04-25-2017 01:40 PM

How to make a rise
 
Hi guys I'm after making a rise before a chorus in a song, kind of what they use in EDM. Can anyone help me do this the quickest and easiest way please

A big thank you in advance


Sent from my iPhone using Tapatalk

Ben Jenssen 04-25-2017 02:43 PM

Re: How to make a rise
 
Can you be more specific?
A rise?
In level, or what?

Raoul23 04-25-2017 02:46 PM

Re: How to make a rise
 
It's a bit like a reverse symbol sound but slightly different and the noise/sound becomes more hi pitched like a HPF is being sweeped from one end to the other hope this helps more


Sent from my iPhone using Tapatalk

edwinstar 04-25-2017 02:52 PM

Re: How to make a rise
 
use the signal generator to create white noise and then automate a eq lopass sweep.
or
http://www.airmusictech.com/product/...r#.WP_EcYHKGEc

Raoul23 04-25-2017 03:11 PM

Re: How to make a rise
 
Quote:

Originally Posted by edwinstar (Post 2427079)
use the signal generator to create white noise and then automate a eq lopass sweep.
or
http://www.airmusictech.com/product/...r#.WP_EcYHKGEc



Yes that's one thank you


Sent from my iPhone using Tapatalk

simon.a.billington 04-26-2017 03:02 AM

Re: How to make a rise
 
You can add a bit of resonance to the low pass as well and possibly automate the volume for more dramatic effect. You could do the same effect with a synth too.

Raoul23 04-26-2017 03:27 AM

Re: How to make a rise
 
Quote:

Originally Posted by simon.a.billington (Post 2427174)
You can add a bit of resonance to the low pass as well and possibly automate the volume for more dramatic effect. You could do the same effect with a synth too.

I have Access Virus TDM synth, how would i go about doing it with this, i'm not a synth person so would be learning from scratch.

simon.a.billington 04-26-2017 03:37 AM

Re: How to make a rise
 
Quote:

Originally Posted by Raoul23 (Post 2427177)
I have Access Virus TDM synth, how would i go about doing it with this, i'm not a synth person so would be learning from scratch.

Similar technique to above, but use the synth oscillator to create a white noise signal, if possible. Then use the inbuilt Low Pass Filter and resonance to shape the tone.

Start with a low frequency setting on the LPF and raise it to a higher value using automation. You can set up the volume envelope attack to be a little bit slower too, so it doesn't sound so abrupt.

In all reality there may be a riser or sweep patch In the Virus. See if you can find one before messing about with doing your own.

Stig Eliassen 04-26-2017 03:39 AM

Re: How to make a rise
 
Quote:

Originally Posted by Raoul23 (Post 2427177)
I have Access Virus TDM synth, how would i go about doing it with this, i'm not a synth person so would be learning from scratch.

- use a keyboard sound that fades out > print it > reverse it
- automate the pitch bend (+/- 12 semitones) on a synth
- reverse a cymbal
- automate filters/EQ of pure pink noise with FX (reverb/delay/modulation)

There's a million ways to do this.

Raoul23 04-26-2017 03:46 AM

Re: How to make a rise
 
Quote:

Originally Posted by Stig Eliassen (Post 2427183)
- use a keyboard sound that fades out > print it > reverse it
- automate the pitch bend (+/- 12 semitones) on a synth
- reverse a cymbal
- automate filters/EQ of pure pink noise with FX (reverb/delay/modulation)

There's a million ways to do this.

Thank you, ive tried the reverse cymbal one before but never seemed to get it to sound/sit right in the mix can sometimes sound a bit harsh. Its the noise rise that i'm after i will try these tonight and report back. Thank you for your help


All times are GMT -7. The time now is 09:54 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com