Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Pro Tools HDX & HD Native Systems (Win) (https://duc.avid.com/forumdisplay.php?f=97)
-   -   Balancing OMNI hardware in/out (https://duc.avid.com/showthread.php?t=401508)

abt 10-15-2018 04:13 PM

Balancing OMNI hardware in/out
 
I have an HD OMNI. The analog in is set to -10dBV and the out is set to +10dBu (note dBV vs dBU). There’s a noticeable level drop between the signal going in and coming out of the analog paths.

Is there a good way of making the level balanced? Or do you just adjust the level using fader/plugin level adjustment? I find that no matter what I do it just doesn't seem to match.

Darryl Ramm 10-15-2018 04:21 PM

Re: Balancing OMNI hardware in/out
 
What are you trying to do exactly? You using a hardware insert. What device?

Why is this important?

BScout 10-15-2018 06:10 PM

Re: Balancing OMNI hardware in/out
 
+24dBu output (line level)
+4dBu input

You should mention the gear you are putting as the insert.


All times are GMT -7. The time now is 06:13 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com