replacement faders for Control 24
As the DigiStore no longer carries these-
for anyone looking, Sweetwater has them $55 each- the folks in the parts department know exactly what your asking for! |
Re: replacement faders for Control 24
Or you could buy them straight up from Alps for around $27 each
|
Re: replacement faders for Control 24
as I could never get a confirmation that the Alps number offered up was the exact/equivalent (and Digi would never provide a #)- and I lack the patience to tear open the console to look for a part #
The extra $ is worth the piece of mind... |
Re: replacement faders for Control 24
I'll grab the exact numbers this weekend... tomorrow if you email me about 3 or 4 PM CST
shortyemcee AT gmail [dot] com I'll be in the studio. email goes to my BB I just don't remember off the top of my head.... have all the info at the studio You can also get compatible P&G faders if you aim to replace them all. I wouldn't want a mix.... |
Re: replacement faders for Control 24
they haven't arrived yet, so it won't be tomorrow- for others it would be nice to know alternate source with "no worry's"- don't know if the Sweetwater # is the actual part or just their part# so I'll wait till it arrives- I e-mailed the Alpha rep on another forum but he never responded... i guess not much interest in someone only wanting 1 or 2
I only have one spastic fader to replace |
Re: replacement faders for Control 24
They arrived today
aside from ALPS stamped on the side, I'm not seeing an part# and the part number from Sweetwater (Digi?) doesn't match the ALPS numbering. Looking at the ALPS cut sheets I don't see a motorized fader with attached leads w/plug, the other dimensions seem to be the same 91802822600 is the part # from Sweetwater |
Re: replacement faders for Control 24
I know this is an old thread, but I need a few of these faders at the moment. It looks like the Alps part number is RSA0K11V901S, but it's hard to be sure, and their minimum order is 84. Also, I don't see them on the sweetwater site. Any idea where I can get these?
|
Re: replacement faders for Control 24
then again it could be RSA0N11M9A0K for the part number, not sure if they'd consider this a lead, or a connector.
|
Re: replacement faders for Control 24
I also find to replace out of work C24 fader to new one. Above posts helpfule to me. But I couldn't exactly model number of ALPS.
Somebody answer to me what is the exactly match to replacement as C24 fader? |
Re: replacement faders for Control 24
A couple of years later, and I find myself in the same situation. I'm glad the younger version of myself is so helpful.
|
All times are GMT -7. The time now is 04:57 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com