Link matrix on version 2.8.2
Hello, i've try to link matrix 1 and matrix 2 to make a stereo out. I assign master left on matrix 1 and master right on matrix 2, when i link it, the matrix 2 as the master left assign. Is there a bug or do i make a mistake ?
Thank Rémy |
Re: Link matrix on version 2.8.2
Hi Remy,
I think I see what you are doing. Each of the 12 input sources within each Matrix mixer is shared so whichever input is assigned to Input 1 on Matrix 1 will also be the input 1 on all other Matrix Mixers. Your Main L and R are by default assigned to inputs 9 and 10. To do what I think you're trying to do try the following : - under Options > Busses : Link matrix 1 and 2 (sounds like you already did this) - under Outputs, select Matrix 1. Since you linked Matrix 1 and 2 you should see a pan pot on every input channel. By default inputs 1 - 8 are assigned to Group outs 1 - 8. Inputs 9 and 10 are assigned to Main Left and Main Right. - Pan input 9 hard Left and input 10 hard Right. Set both input levels to 0 dB and switch the input source ON (You can also link the levels for these inputs by checking the link box under inputs 9 - 10) - In the patchbay > Outputs : assign a physical output to Matrix one and another one to Matrix 2. Any Matrix input source panned Hard Left will only come out of the output assigned to Matrix 1 and anything panned Hard Right will only come out of the output assigned to Matrix 2. I hope that makes sense. Let me know if you have further questions. Thanks |
Re: Link matrix on version 2.8.2
Are you using any PQ sends?
they are just stereo a Matrix |
Re: Link matrix on version 2.8.2
but there´s no delay for pq. right?
|
Re: Link matrix on version 2.8.2
Hi Chris Thank for the info, i try it and it work's very well:-)
|
All times are GMT -7. The time now is 05:22 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com