S3 VCA spill omits 1st spilled channel
 

Running 2018.1 with Eucon 3.7.0 138 When spilling VCAs the first track in any given VCA group is omitted. Granted after spilling nudging the the right makes it appear on the first fader as it should but I don't seem to remember this behavior in the past. Re installs, unchecking and rechecking, relaunching changing up all the controller preferences back and forth - nothing seems to solve this. Any suggestions would be greatly appreciated.

Re: S3 VCA spill omits 1st spilled channel
 

check your eucon layout and see if nothing is occupying the spot

Re: S3 VCA spill omits 1st spilled channel
 

Thanks but it's all clear.

Re: S3 VCA spill omits 1st spilled channel
 

What is this page set to... and do you have a dock too?

https://i.imgur.com/TieUg65.png

I can't create the issue on my setup.
Just wondering if it thinks the first channel is spilling to the dock's fader

Re: S3 VCA spill omits 1st spilled channel
 

Yes I do have a dock and think I've solved it. Deselecting: Auto Spill VCA from Control App Attention in conjunction with deselecting in Protools prefs: "Scroll to Track" Banks Controllers - seems to have done it so far. Thank you for looking into this. Lots of trial and error seemed to finally solve it!

Re: S3 VCA spill omits 1st spilled channel
 

I see this on my system and we are investigating....

Re: S3 VCA spill omits 1st spilled channel
 

Yes I spoke too soon and noticed that it intermittently still drops the first track of a VCA group. Random. Didn't used to do that however I can't remember when it started happening.

Re: S3 VCA spill omits 1st spilled channel
 

Checking in to see if anybody has thoughts on this problem. My S3 is still dropping the first channel of a spilled VCA group - pretty much every single time.

Thanks

Re: S3 VCA spill omits 1st spilled channel
 

Found the problem but not the solution. I have a Dock and iPad along with the S3. If I remove the dock from My Surfaces all works as expected. This problem began with Eucon 3.7.0 138

Re: S3 VCA spill omits 1st spilled channel
 

I think we found the culprit. On the Surfaces page turn off Artist Control banks independently.