Eucon via VPN
Is it possible to use an Artist Mix via VPN?
I have two Routers connected via a VPN and can access all of the devices connected to either of the networks. But an Artist mix connected to one of the networks doesn't appear in the EuControl-App on a computer in the other network. Is it possible to get that working? |
Re: Eucon via VPN
Technically maybe... you would have to make sure ports were allowed to be opened and forwarded correctly etc. but the latency would probably cause it to drop network packets and be very buggy.
|
Re: Eucon via VPN
Do you know which ports I would have to forward? I can't find the information which ports are used in the documentation.
|
Re: Eucon via VPN
The ports are not fixed unfortunately.
|
Re: Eucon via VPN
Quote:
|
Re: Eucon via VPN
You have to open it up for all ports (which is probably the default anyway) Do both ends have the same subnet? I.E. what is the IP address of the workstation and what is the IP of the Surface?
|
Re: Eucon via VPN
You're right. They seem to be all open.
The way the VPN is done only allows for different subnets in the two networks. |
Re: Eucon via VPN
Tried it on the same subnet - still not working. :/
|
Re: Eucon via VPN
Quote:
|
All times are GMT -7. The time now is 09:02 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com