Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Pro Tools HDX & HD Native Systems (Mac) (http://duc.avid.com/forumdisplay.php?f=94)
-   -   Madi + omni (http://duc.avid.com/showthread.php?t=411349)

AINSLIE 07-30-2020 05:43 PM

Madi + omni
I need to track 50 inputs fed to me via MADI. I have 1 HDX card. Can I connect my OMNI to a port, then the MADI to the omni's expansion port and configure the I/O to use some OMNI analog and some MADI? Then use the other HDX port for the second MADI i/o? Make sense? With a MADI interface alone taking both ports I have no monitoring or way to feed a mix to the video peeps.

Make sense? Or do I need to get a second HDX card? Any way around that and have a couple Analog monitoring outputs?

TIA, Ainslie
(sorry if this has been covered ... )

nedd 08-01-2020 06:39 AM

Re: Madi + omni
To get 64 channels MADI to Pro Tools, you need to connect both ports on your HDX card to MADI. If there is expansion port on MADI (I forgot) you could connect OMNI to that?!

AINSLIE 08-01-2020 06:51 AM

Re: Madi + omni
There’s an expansion port on the Omni - I did find a previous thread that covered this. Seems like I’ll get 48ch madi if I use a port to expand thru the Omni. In my case I can work with that. I will find out Monday when I set up for the recording.

nedd 08-01-2020 07:10 AM

Re: Madi + omni
I think that can work, you connect one MADI port to second port on the card and other port to OMNI!

All times are GMT -7. The time now is 07:50 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com