Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   ProControl, Control|24, Command|8 (http://duc.avid.com/forumdisplay.php?f=16)
-   -   Basic Configuration Question form Newbie (http://duc.avid.com/showthread.php?t=403534)

Raemond Cook 02-25-2019 07:09 AM

Basic Configuration Question form Newbie
Hi Guys & Gals

Maybe I being stupid but how does the say for example the 192 or the 96 i\o's produce audio signals from the session, does it come through the link cable via the core acell cards or do I need to have another breakout cable on the input side of the 192\96 i\o units to take an input signal then back out to the PC input 2, prob sounds a daft question but maybe thats my issue as have moved all interface around, checked all connections etc, but still no audio output from PT session HD mode

Stig Eliassen 02-25-2019 09:59 AM

Re: Basic Configuration Question form Newbie
The audio goes via the cable that connects your card(s) and your interface. Then, you need to connect a pair of the interface outputs to your speakers (I highly recommend going via some sort of monitor controller), and configure the I/O Setup in PT accordingly.

All times are GMT -7. The time now is 02:38 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com