S6 v2.2 and Layouts
 

I'm trying to get back to the way we were working before upgrading to v2.2, and I can't figure out what I'm doing wrong.

We have 32 faders. Faders 1-16 are used in a layout to hold VCAs which are then spilled into the spill zone. The spill zone is faders 17-32.

I created the layout, there are no channels in the layout past fader 16. The first time I select the layout it's fine. Then after spilling a VCA master into the spill zone I can't "unspill" the faders from 17-32. From that point on all of the layouts display into the spill zone instead of faders 1-16.

Thoughts?

MacPro 3.5GHz 6-Core/64GB
PT11.3.2, S6 2.2

Re: S6 v2.2 and Layouts
 

Greetings,

If an L Spill or R Spill switch is lit white, when you recall a layout it will recall into that particular zone and not a 1-1 global layout. Is this what you are seeing? Use SHIFT + L Spill or R Spill to collapse the zone.




Jeff

Re: S6 v2.2 and Layouts
 

That was it.

Thank you!

Re: S6 v2.2 and Layouts
 

A facility I freelance at has recently updated their S6.
Today I couldn't spill most of my layouts to the R spill zone. It kept jumping back to normal banked tracks. There was exactly one layout in my template that was assignable.
Any idea what was causing this? I used to be able to spill my VCA master layout (resulting in empty faders) and nudge/bank that through to move the vcas visibly within the zone.

Seemed like spilling the layout got an error and jumped straight out of it.
Any changes in recent software?

Re: S6 v2.2 and Layouts
 

... will post a new topic since this is pretty old - sorry!