Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Pro Tools TDM Systems (Win) (https://duc.avid.com/forumdisplay.php?f=9)
-   -   Firmware Win7/10 PT10.3.10 HD2 PCI-E TDM D96IO (https://duc.avid.com/showthread.php?t=399792)

s9dd 06-15-2018 07:03 AM

Firmware Win7/10 PT10.3.10 HD2 PCI-E TDM D96IO
 
Just built a second Win10 PT HD2 10.3.10 TDM system, and plugged in a pair of 96I/O's to test it.

When the PC is powered off, the two 96I/O's do different things. One gives me an orange LED around the power button, but nothing else; the other seems to reflect its powered up state, with LEDs all over the place lit.

Digitest shows that the firmware on both is v4.9, yet offers me the intriguing opportunity to update it to v3.0 on one of them... Odd!

The HD2 system is based on PCI-E version Accel Core and one Accel card, so I wondered if it may be linked to the revisions of these cards, much less Digitest itself (I used the version packaged with HD v10.3.10).

I am keen to understand firmware and upgrades from Digitest little better, if anyone can shed some light?

albee1952 06-29-2018 02:33 PM

Re: Firmware Win7/10 PT10.3.10 HD2 PCI-E TDM D96IO
 
Not sure but I would redo testing with only 1 96 IO connected until they both work, but one at a time. Once both of them work by themselves, then try connecting both together. If one needs to update, having both connected together might be an issue:o


All times are GMT -7. The time now is 10:45 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com