Pro Tools Complete Midi CC# Chart
 

To Control PT12 with my generic Midi Controler....
i have setup a list with all the CC# used and free and found some Dead CC#

i thought i will share the list so you can see what CC# are free to programm with your plugins side a side to the Transport Control:
(Setup Descriped at the end)

Pro Tools Complete Midi CC# Chart

Free Programmable CC# : 75 (0-11,16,25-32,42-48,58-63,65-73,79-108,112,119)
Pro Tools Fixed CC# : 39 (12-15,17-24,33-41.49-57,109-111,113-118)
Dead CC# (Not working) : 14 (64,74-78,120-127)

CC# 0-127 =

CC# 0
CC# 1
CC# 2
CC# 3
CC# 4
CC# 5
CC# 6
CC# 7
CC# 8
CC# 9
CC# 10
CC# 11
CC# 12 – mute selected track
CC# 13 – solo selected track
CC# 14 – move bank left
CC# 15 – move bank right
CC# 16
CC# 17 – Pan knob 1 (incremental/endless)
CC# 18 – Pan knob 2 (incremental/endless)
CC# 19 – Pan knob 3 (incremental/endless)
CC# 20 – Pan knob 4 (incremental/endless)
CC# 21 – Pan knob 5 (incremental/endless)
CC# 22 – Pan knob 6 (incremental/endless)
CC# 23 – Pan knob 7 (incremental/endless)
CC# 24 – Pan knob 8 (incremental/endless)
CC# 25
CC# 26
CC# 27
CC# 28
CC# 29
CC# 30
CC# 31
CC# 32
CC# 33 – Fader 1
CC# 34 – Fader 2
CC# 35 – Fader 3
CC# 36 – Fader 4
CC# 37 – Fader 5
CC# 38 – Fader 6
CC# 39 – Fader 7
CC# 40 – Fader 8
CC# 41 – Master Fader
CC# 42
CC# 43
CC# 44
CC# 45
CC# 46
CC# 47
CC# 48
CC# 49 – Slider Button 1
CC# 50 – Slider Button 2
CC# 51 – Slider Button 3
CC# 52 – Slider Button 4
CC# 53 – Slider Button 5
CC# 54 – Slider Button 6
CC# 55 – Slider Button 7
CC# 56 – Slider Button 8
CC# 57 – Flip button
CC# 58
CC# 59
CC# 60
CC# 61
CC# 62
CC# 63
CC# 64 --- NOT WORKING! ---
CC# 65
CC# 66
CC# 67
CC# 68
CC# 69
CC# 70
CC# 71
CC# 72
CC# 73
CC# 74 --- NOT WORKING! ---
CC# 75 --- NOT WORKING! ---
CC# 76 --- NOT WORKING! ---
CC# 77 --- NOT WORKING! ---
CC# 78 --- NOT WORKING! ---
CC# 79
CC# 80
CC# 81
CC# 82
CC# 83
CC# 84
CC# 85
CC# 86
CC# 87
CC# 88
CC# 89
CC# 90
CC# 91
CC# 92
CC# 93
CC# 94
CC# 95
CC# 96
CC# 97
CC# 98
CC# 99
CC# 100
CC# 101
CC# 102
CC# 103
CC# 104
CC# 105
CC# 106
CC# 107
CC# 108
CC# 109 – Mode button
CC# 110 – Prev track
CC# 111 – Next track
CC# 112
CC# 113 – Loop button
CC# 114 – Rewind
CC# 115 – Fast Forward
CC# 116 – Stop
CC# 117 – Play
CC# 118 – Record
CC# 119
CC# 120 --- NOT WORKING! ---
CC# 121 --- NOT WORKING! ---
CC# 122 --- NOT WORKING! ---
CC# 123 --- NOT WORKING! ---
CC# 124 --- NOT WORKING! ---
CC# 125 --- NOT WORKING! ---
CC# 126 --- NOT WORKING! ---
CC# 127 --- NOT WORKING! ---

--------------------------------

Setting up a Generic Midi controler for ProTools 12 =

1. Open ProTools and go to Setup > Peripherals > MIDI Controllers

2. Add a controller
Type: M-Audio Keyboard
From: CONTROLLER VIRTUAL OUT
To : CONTROLLER VIRTUAL IN
#Chs: 8

Here is a list of the CC#s used . You can use these values to set up other controllers or create your own scenes.

CC#

12 – mute selected track
13 – solo selected track
14 – move bank left
15 – move bank right

17 thru 24 – Pan knobs (incremental/endless)

33 thru 40 – faders
41 – master fader

49 thru 56 – Slider Buttons
57 – Flip button

109 – Mode button
110 – Prev track
111 – Next track

113 – Loop button
114 – Rewind
115 – Fast Forward
116 – Stop
117 – Play
118 – Record

=

Transport:

All transport buttons map to their corresponding buttons in Pro Tools. Play, stop, rewind, forward and record act as you would expect in in PT8′s transport window. Holding the loop button while pressing the transport keys gives more options. Loop + Play enables loop play, and Loop + Record enables loop record. Loop + Stop will undo the last action and Loop + RR or FF moves to the beginning or end of the song.

Sliders 1-8

Sliders 1-8 control the corresponding sliders in Protools. The sliders are controlled in banks of 8.8. The bank will change if you select a track outside of the current bank of 8, or if you use the change bank buttons.

Slider 9

Maps the rightmost master fader.

Pan Knobs 1-8

The knobs unfortunately are not emulated correctly. This is due to the fact the Axiom 61 uses “endless” knobs while the nanoKontrol uses absolute knobs. The knobs can reliably give settings of full left, centered or full right. Normally the knobs are mapped to pan controls, though this can change

Upper button row

1 – < Track (Previous Track)
2 – Track > (Next Track)
3 – < Bank (Previous Bank)
4 – Bank > (Next Bank)
5 – unused
6 – unused
7 – Mute selected
8 – Solo Selected
9 – Mode Button

The Mode button switches between mixer mode and insert mode. When in Mixer mode the nanoKontrol’s knobs control PT8′s mixer pan knobs. In insert mode the knobs are used to control plug in knobs or settings.

Lower Button row

1 thru 8 – Slider buttons
9 – Flip button

In mixer mode the flip button switches the use of the slider buttons between these functions:

Select track
Arm track to record
Mute track
Solo track

In insert mode, the flip button switches the functions of the pan and slider knobs.

How to control Plug ins with the nanoKontrol

Most users will probably be satisfied being able to use the transport and sliders with the basic button functions. If you would like to also edit plug in controls, you need to enable the Insertmode with the mode button. In insert mode, you can use the knobs to change the values of the plug in controls. Unfortunately though, knob emulation doesn’t work very well with the nanoKontrol. You can use the flip button in Insert Mode to switch the function of the knobs and sliders. Then the sliders will control the plug in (and the knobs will control PT mixer faders). This can get a little confusing because there are no visual indicators on the nanoKontrol to let you know the status of the Mode or Flip buttons.

Finally, if you want to use the knobs to correctly control the plug ins, I swapped the CC#s of the sliders and faders between Scene 1 and Scene 2 (Scene 3 and 4 are copies of 1 and 2).

Workflows:

To edit plug ins with sliders
1. Press Mode
2. Press Flip
3. Enable Scene 1 or 3

To edit plug ins with knobs
1. Press Mode
2. Press Flip
3. Enable Scene 2 or 4

--------------------------------------------------------------------------

Re: Pro Tools Complete Midi CC# Chart
 

Print Sheet =

Programmable Midi CC# CHART
-----------------------------------------

Plugin = _________________
--------------------------------------

Rotary Encoder (or any)

CC# 0________________________


CC# 1________________________


CC# 2________________________


CC# 3________________________


CC# 4________________________


CC# 5________________________


CC# 6________________________


CC# 7________________________


CC# 8________________________


CC# 25_______________________


CC# 26_______________________


CC# 27_______________________


CC# 28_______________________


CC# 29_______________________


CC# 30_______________________


CC# 31_______________________


CC# 32_______________________


CC# 42_______________________


CC# 43_______________________


CC# 44_______________________


CC# 45_______________________


CC# 46_______________________


CC# 47_______________________


CC# 48_______________________


CC# 58_______________________


CC# 59_______________________


CC# 60_______________________


CC# 61_______________________


CC# 62_______________________


CC# 63_______________________


CC# 65_______________________


CC# 66_______________________


CC# 67_______________________


CC# 68_______________________


CC# 69_______________________


CC# 70_______________________


CC# 71_______________________


CC# 72_______________________


CC# 73_______________________


CC# 79_______________________


CC# 80_______________________




Switch Encoder (or any)

CC# 9________________________


CC# 10_______________________


CC# 11_______________________


CC# 16_______________________


CC# 81_______________________


CC# 82_______________________


CC# 83_______________________


CC# 84_______________________


CC# 85_______________________


CC# 86_______________________


CC# 87_______________________


CC# 88_______________________


CC# 89_______________________


CC# 90_______________________


CC# 91_______________________


CC# 92_______________________


CC# 93_______________________


CC# 94_______________________


CC# 95_______________________


CC# 96_______________________


CC# 97_______________________


CC# 98_______________________


CC# 99_______________________


CC# 100______________________


CC# 101______________________


CC# 102______________________


CC# 103______________________


CC# 104______________________


CC# 105______________________


CC# 106______________________


CC# 107______________________


CC# 108______________________


CC# 112______________________


CC# 119______________________

Re: Pro Tools Complete Midi CC# Chart
 

You do know that several of your controller settings conflict with standard MIDI cc uses right? For instance cc33 is mod wheel, cc34 is breath control, etc. I suggest you take a look at these links:
http://web.archive.org/web/200707021...ntrollers.html
http://www.nortonmusic.com/midi_cc.html

Re: Pro Tools Complete Midi CC# Chart
 

checked it but that does apply only if you NOT chose the Controler on Pheriphials.....if you use the controler with the M-Audio protocol things are mapped different...as in the list Pro Tools do use CC#33 for Fader 1 when set as controler in pheriphials with M-audio

Re: Pro Tools Complete Midi CC# Chart
 

What is 'M-Audio protocol'?

Re: Pro Tools Complete Midi CC# Chart
 

It was called Hypercontrol.

Re: Pro Tools Complete Midi CC# Chart
 

I've been obsessing over this the last few days. I bought a CODE-61 and hoped it would be an upgrade from the AXIOM PRO-25. Lost all the glorious Hypercontrol things like:

Show/Hide Plugin
Scroll through sends, plugins

and I just cannot get the FLIP button CC to take hold... I really wanted to control the knobs inside plugins with real knobs on the CODE but stuck...

I think I might try a reverse-lookup MIDI program, to see if I can hack it. Are folks still messing around with this?

Re: Pro Tools Complete Midi CC# Chart
 

yes Hypercontrol was great (when it worked)!

did you try to use the CODE-61 as an "M-Audio Keyboard" device in the Peripherals/MIDI Controller setup of PT?

Re: Pro Tools Complete Midi CC# Chart
 

Yes I have, and had some success but the transport controls went black. I am still learning how to operate the CODE-61. If I set it up as M-Audio Keyboard within PT, I get some interesting results, scrolling through presets on the CODE - evidence that lots of cool things can be controlled.

I've been able to set up next and previous track, which is cool. I wanted to be able to re-program the bank and transport buttons on the CODE, but it seems not possible.

Man, Hypercontrol is so nice. I just got to the point where I was flying around on the AXIOM PRO 25 and hardly using the mouse, but the pitch bend died and started sending bogus messages, so I sold it. Hence the upgrade to CODE, but I should have just bought a PRO 61.

I swear I'm going to get this to work...

Re: Pro Tools Complete Midi CC# Chart
 

Thanks for this, just got a novation launch control to use with PT11.x. I wanted something to control my native instruments synth parameters and it worked like a charm. Thanks so much for posting.