Use of Pro Tools with M-Box Pro
Can I still use my MBox Pro with Pro tools? I bought Protools with Mbos Pro years ago and I have never tried the interface. Does anyone knows about this?
Thanks, Petros |
Re: Use of Pro Tools with M-Box Pro
Welcome to the DUC!
Mbox Pro works OK here with my setup - and it's still supported until 3/1/2020 Avid Knowledge Base - Avid End of Life Dates Last Updated: April 18, 2019 http://avid.force.com/pkb/articles/e...-support-dates Product: Mbox Pro (third generation) Final Sale Date: 3/1/2015 End of Support Date: 3/1/2020 |
Re: Use of Pro Tools with M-Box Pro
I also have an MBox Pro (3rd generation).
I'm wondering what happens once it reaches the end-of-life date: Is it just that there will be no more firmware updates? Can I assume that it will still work? |
Re: Use of Pro Tools with M-Box Pro
Quote:
End of support means that Avid is not making a commitment to update device drivers, the existing drivers may or may not work with new operating systems releases. And that becomes entirely your problem. When that happens you will need to be very cautious about operating systems upgrades. |
Re: Use of Pro Tools with M-Box Pro
I ran the blue Mbox 2 PRO with PT12.4 recently(now replaced with a DIGI003rack and 2019.5).
|
Re: Use of Pro Tools with M-Box Pro
Thanks Darryl and Albee. Good to know.
I checked the digidesign003rack and see that's apparently discontinued. Will need to look for an alternative, I guess. |
Re: Use of Pro Tools with M-Box Pro
Avid has long ago left the consumer interface market, unless you want an Eleven Rack.
UAD, Apogee, Motu, RME, Presonus, Focusrite, Lynx, Grace Design, Antelope, Prism Sound (alright I'm out of the home market by now...). There are many vendors to choose from, and many wonderful products. Start by looking at audio industry resellers like Sweetwater or Vintage King to see what is out there. |
Re: Use of Pro Tools with M-Box Pro
Quote:
They came back suggesting this https://www.sweetwater.com/store/det...o-16x16-analog which is $4500. :eek: I don't want to the hijack the OP's thread. I should start a new one describing my setup and asking for suggestions. Thanks again. |
Re: Use of Pro Tools with M-Box Pro
Quote:
|
Re: Use of Pro Tools with M-Box Pro
Quote:
I was pretty shocked because I'd already told the guy that I use 12.8.3 but will upgrade to Pro Tools 2019. I also told him that I use a PreSonus BlueTube V2 preamp (which, while I may be wrong, would seem to point to the idea that I need something very barebones). The MBox3 I have serves as an interface only--instruments (TRS) and mics (XLR) are plugged into the PreSonus. Thanks again. |
All times are GMT -7. The time now is 04:06 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com