projectmix problem
 

hi all
I got my projectmix since a year.
yesterday I get new update 10.4.9 .
I tryed to open protools session but my controler(projectmix mode HUI) wasn't working.
tryed all what I need but I didn't fine my midi configuration and (hui)
I turned to 10.4.8 but same
what I have to do I don't know?
PT LE 7.3.1
G5 dual core 2 GhzMac os x 10,4,8

002 r
thanx
jean

Re: projectmix problem
 

hi there
I got same problem but I can not have a repons from anyone!!!!!!!!!
who is responsable the projectmix I don't know!!!!!!!!!!!!
who can say me what's happen?
DIGI or M-Audio.
or
DIGIMAUDIOAVID???????????????
what we have too do for having answer for these problem?

peaceeeeeeeeeeeeeeeeeeeeeeeee
but not all the timeeeeeeeeeeeeeeeee

Re: projectmix problem
 

If you have already updated to 10.4.9, you may have problems going back to 10.4.8. Click on the Compatibility link above for information on 10.4.9.

Although not officially supported with Pro Tools, at this point you might be better off using the combo updater to 10.4.9, then following the instructions in the Troubleshooting topic at the top of the M-Powered forum.

The alternative would be to erase your drive and reinstall 10.4.8 and Pro Tools.

Re: projectmix problem
 

PT LE 7.3.1 with a project mix I/O? I don't think so...

Re: projectmix problem
 

i use my projectmix with PT LE like controler(hui)
and also with logic pro!

anyway
I did what I needed with mac os combos and 10.4.8 but same problem!
when I would like to use my projectmix like controler but it's inactive in the configuration AMS.
I am not M-Powered user so I have to write here for my problem with PT LE 7.3.1
thanx
an
peace

Re: projectmix problem
 

hi
do it if you have problem with projectmix !



http://duc.digidesign.com/showflat.p...part=1#1138706
thanx for m-audio team
peace

Re: projectmix problem
 

Only the combo update for OSX to 10.4.9. will work. If your G5 is intel based, and I believe it is, roll back to PMIO driver version 1.7.4. Uninstall the PMIO driver manually and reinstall 1.7.4 from the Maudio site.

All those issues should go away like magic.

Bob