S3 faders 1-8 not sending/receiving data
I have an S3 that has been RMA'd once. I've tried all iterations of firmware with no change in behavior. First 8 faders don't respond at all when synced with EUCON. Faders 9-16 are good.
I have ruled out the faders as the issue. During boot up/firmware update sometimes they will move sporadically. Also swapped #1 and #10 and no change. Anybody with knowledge of the circuitry possibly have an explanation? I have the board opened up right now and I can see the green LEDs (rear side) near the faders are not lit up for the #1-8 half. They come on briefly when power is cycled. Thanks for any insight you may have! Let me know if pictures would help. |
Re: S3 faders 1-8 not sending/receiving data
Have you tried using test mode ? http://avid.force.com/pkb/articles/e...lity-Test-Mode
|
Re: S3 faders 1-8 not sending/receiving data
Quote:
|
All times are GMT -7. The time now is 05:20 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com