Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Avid S6 (http://duc.avid.com/forumdisplay.php?f=120)
-   -   19.12? (http://duc.avid.com/showthread.php?t=407507)

rcutz 12-08-2019 05:10 PM

19.12?
 
HI There.
Is there a new OS/Eucon update?
Just checked my account and found out that 19.12 AVID S6 SOFTWARE.
Best
R.

priorytools 12-09-2019 02:35 AM

Re: 19.12?
 
Quote:

Originally Posted by rcutz (Post 2547075)
HI There.
Is there a new OS/Eucon update?
Just checked my account and found out that 19.12 AVID S6 SOFTWARE.
Best
R.

I see that too. . There's no "What's New" in the "all docs" zip. .

creativecontrol 12-09-2019 04:44 AM

Re: 19.12?
 
EUCON 19.12 for S4 & S6 addresses a number of bugs including the following:

• After attentioning a track, the Master Module and surface draw much quicker than in previous versions

• When a function was auto expanded or sent to the attention expand knobs the knobs for previous inserts could flash on the surface before going to the correct insert (GWSW-12029)

• It was possible for Attention Expand Knobs to fail to open plug-in windows on initial selection (GWSW-12601)

• It was possible for the Function Scroller become unable to be scrolled to the right after expanding Inserts (GWSW-13139)

• It was possible for Attention data to remain on MTMApp after quitting WSControl or changing focus (GWSW-13146)

• It was possible for DADman Sources, Soft Keys, and controls to be missing on initial startup (GWSW-12967)

• It was possible for the WSControl memory usage to increase over time (GWSW-12821)

• The Soft Key “Repeat” function could fail to repeat (GWSW-13221)

• It was possible for the MTM app and surface to struggle or fail to connect when loading a session (GWSW-13033)

best,


Jeff

priorytools 12-09-2019 05:19 AM

Re: 19.12?
 
Thanks Jeff.

EddieJones 12-09-2019 07:49 AM

Re: 19.12?
 
Quote:

Originally Posted by priorytools (Post 2547102)
I see that too. . There's no "What's New" in the "all docs" zip. .

There should be a readme in the account ?

priorytools 12-09-2019 09:04 AM

Re: 19.12?
 
Quote:

Originally Posted by EddieJones (Post 2547126)
There should be a readme in the account ?

Sorry Ed' it's not there. .

rcutz 12-09-2019 09:11 AM

Re: 19.12?
 
Hi,

level metering in the fader module disappears after updating.

Is there a preference to it? Because I have being using it since it was implemented that I did no remember ( pro tools option is set to pre-fader metering)

editing: all metering has gone. Metering in MMT also is not working!

EddieJones 12-09-2019 09:13 AM

Re: 19.12?
 
Have you restarted PT machine after updating ?

rcutz 12-09-2019 09:28 AM

Re: 19.12?
 
yeah. both. will try once again.

EDIT: Needed a few re-starts but it is all back.

rcutz 12-10-2019 07:08 AM

Re: 19.12?
 
1 Attachment(s)
Dmg Equality no showing properly after update.
Plug-in up to date.
Re-starts and shut down - power up already made.
����*♂️



Edited: have turn back to 19.9 but before I made a ”collect files” is it of any interest?


All times are GMT -7. The time now is 11:29 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com