Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Storage Subsystems (https://duc.avid.com/forumdisplay.php?f=14)
-   -   Mezzo... (https://duc.avid.com/showthread.php?t=360071)

Lundy North 10-28-2014 07:26 AM

Mezzo...
 
I have an iLok licence for Mezzo 4.7 and the Mezzo 4.7 software, on an OSX10.4 machine.

Over a year ago this all worked and I was able to extract some projects.

Today when I run Mezzo I get a dialog window stating: "Required software extensions are missing", " Click OK to be transferred to the PACE website"

When clicked it takes me to the iLok website with an error 404.

I do have a file I saved called "interlokextensions.hqx" but I have tried plonking that file in lots of places but no joy.

I know it's a huge ask, but can anybody offer any suggestions?

While I'm here, may I just say a big thank you to Steve Kellogg, and his brother Jack, I think, the creators of Mezzo, a company called Grey Matter Response I do recall, you really did shaft us, I'm sure I will bump into you one day, and I will be able to thank you in person :mad:

Lundy North 10-31-2014 09:11 AM

Re: Mezzo...
 
Sorted it, just had to install the legacy non-intel pace drivers from here: http://sw.ilok.com/macextsx_legacy.dmg

heyjcjc 03-04-2015 10:55 AM

Re: Mezzo...
 
Hey, thank you for that link, I'd gotten the same error and was trying to track down the 4.7 installer. However, now I'm getting the error "An exception of class NilObjectException was not handled. The application must shut down." Have you run into that before?

heyjcjc 03-04-2015 10:56 AM

Re: Mezzo...
 
The G5 that has Mezzo is running 10.5, btw

heyjcjc 03-24-2015 10:49 AM

Re: Mezzo...
 
Figured I'd keep an online log of the steps I'm taking to resurrect these tapes. If anyone needs the PACE installers or ATTO drivers or the configuration tool installer, or the Mezzo 4.7.4 installer, I have them and can email. I'm running into the issue that Mezzo boots up and the PCI card seems to be working, however Mezzo isn't listing the tape drive in the application itself. ATTO Configuration Tool shows a SCSI device present. Huge thanks to everyone that has helped me out on here, btw, and the guys at BMS Chace Nashville. If anyone has any info that could be helpful, I'd be truly grateful. As of now, the software I installed is a clean copy of OS X.4.11, Atto Configuration, Atto drivers and Mezzo 4.7.4

"As of 24MAR2015, 12:40 p.m.
Installed Apple OSX v10.4.11
Installed ATTO Express PCI Plus v3.21
Installed ATTO Configuration Tool v3.07

ATTO Express PCI UL3D SCSI-2, PCI SLOT-2
ATTO ExpressPCI UL3D:

Name: ATTO,ExpressPCIProUL3D
Type: scsi-2
Bus: PCI
Slot: SLOT-2
Vendor ID: 0x1000
Device ID: 0x0020
Subsystem Vendor ID: 0x117c
Subsystem ID: 0x8007
ROM Revision: 1.6.6f0

Under Parallel SCSI Device Tree: (when top rack unit is plugged in and powered)
SCSI Parallel Domain 0:

Initiator Identifier: 7

SCSI Parallel Domain 1:

Initiator Identifier: 7

SCSI Target Device @ 6:

Manufacturer: SONY†
Model: SDT-±0000 †
Revision: 0101
SCSI Target Identifier: 6
SCSI Device Features: Wide, Sync
SCSI Initiator/Target Features: Wide, Sync
Peripheral Device Type: 1

SCSI Logical Unit @ 0:

Manufacturer: SONY†
Model: SDT-±0000 †
Revision: 0101
SCSI Logical Unit Identifier: 0

Under Parallel SCSI Device Tree: (when bottom rack unit is plugged in and powered)
SCSI Parallel Domain 0:

Initiator Identifier: 7

SCSI Parallel Domain 1:

Initiator Identifier: 7

SCSI Target Device @ 5:

Manufacturer: SONY†
Model: SDX-µ00C †
Revision: 0102
SCSI Target Identifier: 5
SCSI Device Features: Wide, Sync
SCSI Initiator/Target Features: Wide, Sync
Peripheral Device Type: 1

SCSI Logical Unit @ 0:

Manufacturer: SONY†
Model: SDX-µ00C †
Revision: 0102

Tried both Rorke Data rack units. Neither recognizes tapes are loaded in Mezzo, nor does it list the tape drives. Under Device Status in Mezzo, only CD/DVD has anything listed, and it lists the Pioneer DVD-RW DVR-117D (B705) via ATAPI.

Top unit bay one is empty, bay two has DDS drive
Top SCSI ID reads: 5
Bottom SCSI ID reads: 6

Bottom unit bay one has unmounted scsi drive, bay two has AIT drive
Top SCSI ID reads: 3
Bottom SCSI ID reads: 5"

heyjcjc 07-07-2015 01:00 PM

Re: Further adventures in Mezzo...
 
Still no luck in getting Mezzo to see the tape drives. Minor developments:

1) When rebooting, the tape drive cycles.

2) Was on tech support with ATTO, everything looks to be in order as far as the ExpressPCI UL3D goes.

3) Had a friend install OS 10.3.9 on another partition and installed all the software needed (as far as I know), still no luck with Mezzo seeing the AIT drives.

Does anyone still have a working Mezzo 4.7 system that's using a dual G5 tower with either OS 10.3.9 or later? I'm wondering if I could clone a working system drive to rule out any missing extension or firmware issue.

Thanks everyone for your help!

heyjcjc 02-05-2016 05:44 PM

Re: Mezzo...
 
FYI, Have 10.3.9 up and running with 4.7 Mostly stable, sometimes crashes :rolleyes:

Steve M 01-03-2019 06:23 PM

Re: Mezzo...
 
Would anyone be willing to sell the ilok with 4.7 ? or rent it?

Jandini 01-04-2019 03:06 AM

Re: Mezzo...
 
Hi Steve,

I have created my own Mezzo 2.x and 4.x restoration Software.
As the software is not “production ready” yet, I’ve been offering Mezzo tape restoration as service. Also remote restoration service if you don’t want to send the tape(s). I’ve successfully restored number of mezzo tapes from Sweden, USA and Poland.

If this is something you’d be interested, let me know. I’m happy to help.

Best Regards

Matt.Janda
.Kingston At gmail.com

heyjcjc 07-20-2021 04:24 PM

Re: Mezzo...
 
Quote:

Originally Posted by Jandini (Post 2511540)
Hi Steve,

I have created my own Mezzo 2.x and 4.x restoration Software.
As the software is not “production ready” yet, I’ve been offering Mezzo tape restoration as service. Also remote restoration service if you don’t want to send the tape(s). I’ve successfully restored number of mezzo tapes from Sweden, USA and Poland.

If this is something you’d be interested, let me know. I’m happy to help.

Best Regards

Matt.Janda
.Kingston At gmail.com

Hey, Matt, did you get that software production ready? The studio computer is still running 4.7.4 thankfully, just curious at this point. Is there an ilok workaround?

Cheers,

-J.C.


All times are GMT -7. The time now is 04:10 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com