bouncing song with reason...
hi,
i´ve done a little songy... and playback runs smooth- i can hear all tracks within the aux-track on which reason is assigned to. also while the bounce-process i can hear the reason-track - but the bounced track doesn´t include my reason track... especially i can hear in the bounced file the drum-intro until bass-guitar (which also is made with reason/midi) beginns to play. i set a midi-channel to NN 19 - the NN19 outs are assigned to the nn19-channel at the reason-mixer - from there i send the bass signal via an aux-send to reasons hardware interface output 3. in PT i´ve created therefore a seperate mono-aux-channel which receives the NN19... - so reasons redrum comes out through reason-channel 1+2 - and the bassguit/NN19 comes out through reason channel 3 - ... i don´t know if this causes the problem.... any ideas... |
Re: bouncing song with reason...
When you bounce, make sure have 'Low Latency Monitoring' off/unchecked (it's under 'Operations'). Otherwise, you'll be bouncing audio tracks only.
-Roy |
All times are GMT -7. The time now is 04:37 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com