DIGI 02r power supply blown again
Just powered up my computer andoo2r and it's not recognizing the hardware..Could this be tha same dreaded power supply problem again?
Had this fixed less than a year ago sheeze I have some sessions coming up this week aggggghhhh!!! any other ideas? thanks |
Re: DIGI 02r power supply blown again
It's possible that the replacement power harness went bad, but not too likely. First thing to do is power everything down and reseat the firewire cable at both ends. If that doesn't fix it, power down the 002R, open her up, and reseat the power harness connector. If that doesn't do it, you may have a problem with your firewire card. You could try reseating it in it's PCI slot, if applicable.
|
Re: DIGI 02r power supply blown again
I had a similar problem a while back.............replacing the firewire cable fixed it for me.
...dog |
Re: DIGI 02r power supply blown again
Ditto on bad firewire cables. I had one quit for no apparent reason(never been moved or touched).
|
All times are GMT -7. The time now is 11:16 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com