cracking open the c24 for repairs
 

I need to replace a switch on my c-24. The switch is the GO TO START button on the lower right just above the transport. What is the best way to get inside the c-24? is it from the front or the back? Digi sent the replacement part but no instructions. It appears to be an easy fix but I'm not sure the correct way to get into the unit. Any help would be appreciated.

Audioczar

Re: cracking open the c24 for repairs
 

Please contact Digi Tech Support and they will be able to provide repair manuals in PDF format.

Re: cracking open the c24 for repairs
 

How can I contact the Digi Tech support

i can´t send a message to get the pdf Manual to open my C 24. I had to repair a fader ( locked by a part of a Fingernail

Re: cracking open the c24 for repairs
 

Hi Synchro ...

Is this the C|24 or the 'old' C24 ?

Re: cracking open the c24 for repairs
 

Hi Gemylon,
it is the new C|24

Re: cracking open the c24 for repairs
 

I changed 2 cards in my C|24.
Did it myself. No repair manual.
And I am not a technician ...

Use a steady table to work with plenty of lights available.
Turn the C|24 over on a soft surface, and remove the bottom cover.
Plenty of screws yes ... but most of them are identical.
Take your time.

Once opened, everything is partly accessible.
Can't remember what the transport section looked like exactly,
but you probably have to remove stuff to get to the buttons.

Be patient, and use plenty of photos for documentation.
Don't trust your memory ;)

So yes, it is possible to do it all by yourself without any manual.

Good luck !

Re: cracking open the c24 for repairs
 

Thank you and a good Idea

I will do it todays Evening and tell how it works

Regards from Berlin

Re: cracking open the c24 for repairs
 

Hi Gemylon

thanx for your help, every thing work fine and it was very easy to open it and change the fader

kindest regards from Berlin

Re: cracking open the c24 for repairs
 

Glad it worked out for you :)

All the best !