iOS monitor control for MTRX
 

Frustrated by not being able to select sources and outputs for my MTRX via the Dock, I wrote an iOS app. It’s free, completely unsupported by myself, Avid or DAD, and you can find it here:

https://itunes.apple.com/us/app/mom/id1387772808?mt=8

NB: DADman 5.2 or higher required. Configure it as you would a hardware MOM.

Re: iOS monitor control for MTRX
 

Congrats Luke on seeing a problem you could build a solution for, and building it!. Wishing we had some DAD gear.

Re: iOS monitor control for MTRX
 

Great work. Playing with it now.
(BTW, I probably would not have named the app that as DAD could have an issue and any other name would have worked. There's a chance your app will get booted from the store because of that.)

iOS monitor control for MTRX
 

True, I’m totally happy to change the name if they’ve an issue. I’m sure I can think of another punny acronym! Maybe Monitor Utility Module [emoji6]

Re: iOS monitor control for MTRX
 

Bad puns make sessions easier and more fun.

Re: iOS monitor control for MTRX
 

Dig!
:D

Re: iOS monitor control for MTRX
 

Nice work!

Avid should license it from you and port it into the Control App.

Re: iOS monitor control for MTRX
 

I believe that Pro Tools | Control will support monitor source and output selection eventually (via EuCon, which DADman supports). It does already support volume and cut.

The MOM hardware or software remotes are complementary as you can have many of them (each with multiple layers), assigned to different sources and outputs.

Re: iOS monitor control for MTRX
 

A few tips:

• You can set custom names for sources and outputs in Settings
• The app works most reliably when the iOS device and DADman are on the same subnet, however there is some support for separate subnets; this requires a DADman host to be specified in settings
• Swipe left to advance layers (unfortunately due to a protocol limitation it’s not possible to swipe right)
• Again owing to a limitation in the protocol spoken by DADman, it’s not possible to see gains below -40dB. They can be set, however.
• Talkback switch is latching if pressed briefly, momentary if not
• You can rename the MOM device and/or change its device ID from with DADman.
• DADman can sometimes take a moment to reconnect, particularly if the app has been offline for some time. You can prevent your device from going to sleep when MOM is active by enabling Disable Idle Timer in its settings.

Re: iOS monitor control for MTRX
 

Nice job!

I have a question, what is the protocol used by DADMan? Is it Eucon or their own thing? Is it published anywhere?

Cheers,
Pete
ps been listening to your music this morning, enjoying it very much