pro tools 9 and motu 2408mk3
 

Hello,
i want to know if anyone in DUC ever use and work with 2 Motu 2408 MK3 + protools 9 (OS Windows 7 64 bit)

or

2 m-audio delta 1010 + protools 9 (OS Windows 7 64 bit)

please let me know

thank you for the answer

Re: pro tools 9 and motu 2408mk3
 

2 Delta 1010lt's was possible with M-Powered 7.x, but I don't think so with PT 9.x. At least from what I've seen here in the forums with people who have tried, no one's been successful.

Re: pro tools 9 and motu 2408mk3
 

I have precisely this set-up. I've been using it for around 5 months now, and after the initial hiccups (I moved from a Mac G5 and Digital Performer), everything seems to work nicely. What do you want to know?

Re: pro tools 9 and motu 2408mk3
 

I've got the old 2408, (not mk3) but I did'nt test yet. I will install it next week and maybe have some to tell you.
Regards

Re: pro tools 9 and motu 2408mk3
 

to glennpittaway :

Can you record simultaneously using 2 unit of MOTU 2408 MK3 (all 16 analog input only) ???

if you can record all 16 analog input, please let me know how you connect 2 MOTU 2408 MK3, both of your MOTU 2408 MK3 connected to PCIX-424 card/PCIe-424 card inside your PC that running Windows 7 x64 ??? or only one of your MOTU 2408 MK3 that connected to PCIX-424 card/PCIe-424 card inside your PC and then you use ADAT cable to connect the 2nd MOTU 2408 MK3) ???

Re: pro tools 9 and motu 2408mk3
 

I haven't recorded simultaneously on all 16 analog inputs, but I have mixed using all 16 analog outs - it worked with no problems.
Both interfaces are connected to the PCIX-424 in the PC (the card has four slots, so no reason not to connect them that way). I use all analog connections for the interfaces (input and output), and have disabled ADAT etc.. I have a Presonus 8 channel pre filling 8 inputs on one interface. On the other I have 2 UA 6176s, an API 512c, and an Alesis keyboard (stereo). I currently have one spare input, the final pair of inputs take the output from my 2-BUS LT summing amp.
Hope that helps.

Re: pro tools 9 and motu 2408mk3
 

thank you for your answers,
any problem when installing MOTU 2408 MK3 with windows 7 x64 + pro tools 9 ??

Re: pro tools 9 and motu 2408mk3
 

No problems that I recall. For a while I thought I had a problem with the interfaces - they would seemingly randomly revert to 44.1K. I thought it was something to do with the MOTU drivers, but then I figured it might be Windows doing it, which proved to be the case - I've seen this referred to elsewhere in this forum.
Other than that, relatively smooth sailing.

Re: pro tools 9 and motu 2408mk3
 

Any issues with Latency ? Can you use LOW LATENCY MONITORING w/ the MOTU 2408mk3 ?

Re: pro tools 9 and motu 2408mk3
 

can any of you guys using this track a band at 64 or 32 samples successfully without getting the 6101 CPU errors?