Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Avid S1, S3, Dock and Control (http://duc.avid.com/forumdisplay.php?f=135)
-   -   10.5 iPad Pro support? (http://duc.avid.com/showthread.php?t=391933)

willco 01-15-2018 04:19 AM

Re: 10.5 iPad Pro support?
 
Hey Eddie - this appears on the avid store but won't add to my basket to buy it from uk - should i contact a reseller instead?

EddieJones 01-15-2018 12:20 PM

Re: 10.5 iPad Pro support?
 
Thanks for reporting this, I have asked the web team to fix. Please try again tomorrow. Its only available from the Web Store at the moment. Eddie

AINSLIE 04-09-2019 08:20 PM

Re: 10.5 iPad Pro support?
 
3 Attachment(s)
just got a 10.5 iPad pro for my dock. Got the adapter. For anyone looking to do this it can be done for sure, but takes some manipulation. Once you have installed the adapter you are going to want to put the cable into the iPad before putting it in the dock, then slide the iPad into the slot at an angle to make sure the lightning connector goes under the side knob panel and thru the gap. Its really tight like a bum in a bucket. But it will insert albeit with pressure on the lightning cable. Unless I'm doing it wrong!

robertg 04-17-2019 07:16 AM

Re: 10.5 iPad Pro support?
 
It looks like this dock adapter isn't right with the latest redesigned ipad pro, the square one with USB-C. It kind of fits in the groove but the usb-c port is obscured by the dock completely.

Eddie

Any plans to update this adapter again? I'll have to return mine unfortunately

EddieJones 04-17-2019 09:44 AM

Re: 10.5 iPad Pro support?
 
Did you try with and without the rear support ? Could you post a picture ?

robertg 04-17-2019 10:01 AM

Re: 10.5 iPad Pro support?
 
Quote:

Originally Posted by EddieJones (Post 2522395)
Did you try with and without the rear support ? Could you post a picture ?

I don't use the rear support (don't plan to either)

"Manage attachments" gives me a blank page, so here is an image link

https://i.imgur.com/rvHmev4.jpg

As you can see the usb-c port is blocked, the ipad is pushed down as far as possible. If the new adapter was recessed just a little bit lower, it would work... Also would be good to update the cradle's shape for a snug fit

thanks

robertg 04-22-2019 08:44 AM

Re: 10.5 iPad Pro support?
 
Eddie, I'd like to return the dock adapter this week for refund and also get a return shipping label for it due to incompatibility. I don't want to use an ASC for this and am not familiar with Avid support, how would you suggest that I proceed?

EddieJones 04-22-2019 09:51 AM

Re: 10.5 iPad Pro support?
 
Please check out this link https://shop.avid.com/ccrz__CCPage?p...calReturnsForm

robertg 04-22-2019 10:36 AM

Re: 10.5 iPad Pro support?
 
Quote:

Originally Posted by EddieJones (Post 2522629)

"unopened and unused" - hope that won't be a problem

robertg 06-12-2019 11:45 AM

Re: 10.5 iPad Pro support?
 
Hi - I returned my dock adapter. I am wondering if there are any plans to manufacture a new version of this that fits the latest model of ipad?

Again the biggest problem is that the usb-c charging port is blocked.

thanks


All times are GMT -7. The time now is 05:57 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com