PDA

View Full Version : unable to use some I/O


vieris
12-17-2010, 09:55 AM
Any idea why I wouldn't be able to output from the optical channel in this pic? I'm not over the 32 channel limit. It can't be because it falls past the #32 slot is it? That would be ridiculous.
http://farm6.static.flickr.com/5169/5271562299_bb769e2dcd_o_d.png
(http://farm6.static.flickr.com/5086/5269276194_67ba5eca28_o_d.png)

albee1952
12-17-2010, 10:41 AM
Pro Tools sees 32 active ins or outs. To make things work past the 32 limit, you need to de-activate or remove some of the other IO. You may feel this is a PITA, but its still an improvement over 18:rolleyes:

vieris
12-17-2010, 11:01 AM
I've tried. I'm only using 26 active outputs in my actual setup.
Say if I delete all output paths from i/o setup up until my optical. With only the optical out active still = no output.

vieris
12-18-2010, 12:36 PM
Any idea why the optical outs wouldn't work with this I/O setup? http://farm6.static.flickr.com/5169/5271562299_bb769e2dcd_o_d.png
Works fine via the TC integrator plugin, but not directly via PT. I'm stumped.