PDA

View Full Version : my Pcontrol has 1 fader misbehaving


blankpro
08-12-2008, 07:23 AM
fader #7 responds in test mode in CAL by hitting the top and bottom of the channel, but the fader does not seem to receive or send info.

Oddly, swapping the ribbon cable with #7 to #8 then shows TWO defective faders, but swapping to 6 shows that #7 is not responding.

Help!!!

blackmacdaddy
08-16-2008, 10:25 PM
fader #7 responds in test mode in CAL by hitting the top and bottom of the channel, but the fader does not seem to receive or send info.

Oddly, swapping the ribbon cable with #7 to #8 then shows TWO defective faders, but swapping to 6 shows that #7 is not responding.

Help!!!

Go to utility mode and hit Test > Faders > Recal about 50 - 200 times (you can spaz press it a zillion times & walk away.) This has fixed every problem I've ever had on my procontrol with faders acting wonky. Good luck!